Phoenix 12/800 pure sine inverter 230v

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC._x000D_
_x000D_
Features_x000D_
_x000D_
VE.Direct communication port_x000D_
_x000D_
The VE.Direct port can be connected to:_x000D_

_x000D_
• A computer (VE.Direct to USB interface cable needed)

_x000D_

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

_x000D_

_x000D_
Fully configurable:_x000D_

_x000D_
• Low battery voltage alarm trip and reset levels

_x000D_

• Low battery voltage cut-off and restart levels

_x000D_

• Dynamic cut-off: load dependent cut-off level

_x000D_

• Output voltage 210 – 245V

_x000D_

• Frequency 50 Hz or 60 Hz

_x000D_

• ECO mode on/off and ECO mode sense level

_x000D_

_x000D_
Monitoring:_x000D_

_x000D_
• In- and output voltage, % load and alarms

_x000D_

_x000D_
Proven reliability_x000D_
_x000D_
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature._x000D_
_x000D_
High start-up power_x000D_
_x000D_
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools._x000D_
_x000D_
ECO mode_x000D_
_x000D_
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on._x000D_
_x000D_
Remote on/off_x000D_
_x000D_
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector._x000D_
_x000D_
DC connection with screw terminals_x000D_
_x000D_
No special tools needed for installation.