Off Grid Home Medium – 6kw PV / 8kva Inverter/charger / 10kW LiFePo4 battery

From: 7,918.38 ex VAT

MultiPlus-II 48/8000/110-100/100 230V

1,574.60 ex VAT

Lynx Distributor

245.84 ex VAT

Cerbo GX 2

240.92 ex VAT

GX Touch 50

215.11 ex VAT

MEGA-fuse 125A/58V for 48V products (1 pc) × 3

38.08 ex VAT each

Battery disconnect switch 12/24v 200A

38.72 ex VAT

Solar Connectors (pair of M&F) × 4

2.85 ex VAT each

DC Cable pack for kits

61.46 ex VAT

Gewiss GW40001 DIN Enclosure 4 module × 2

26.07 ex VAT each

DC MCB 250v 25A × 4

24.58 ex VAT each

VE.Direct Cable 1,8m × 2

14.75 ex VAT each

RJ12 UTP Cable 1,8 m

9.86 ex VAT

VE.Can to CAN-bus BMS type A Cable 5 m

19.75 ex VAT

Renusol VarioSole Mounting Rail 3000mm × 10

The rail is mounted on the roof hook and holds the end clamp and the middle clamp for the installation of the PV module as well as the cross rail connectors.

47.61 ex VAT each

Renusol Middle Clamp+ 31 - 51mm Black × 28

4.46 ex VAT each

Renusol End Clamp+ 30 - 50mm Black × 8

4.46 ex VAT each

Renusol rail joint × 8

9.77 ex VAT each

Pre-build and configure your components

614.60 ex VAT

Dyness PowerDepot H5B 5.12kWh × 2

1,167.74 ex VAT each

32A MCB 250v DC DIN Mount × 2

24.58 ex VAT each

Renusol VarioSole Bracket for M12 Hanger Bolt × 12

Renusol VarioSole Bracket for M12 Hanger Bolts

_x000D_
Allows fitting to corrugated sheet roofs.

5.65 ex VAT each

Solar PV Cable 6mm x 10m × 5

18.44 ex VAT each

PV Ground Mounts

SmartSolar MPPT 250/100-MC4 VE.Can × 2

666.23 ex VAT each
  • 6kw PV Panels (12 x 545w)
  • 8kva Multiplus II Inverter charger
  • MPPT 250/100
  • Cerbo GX
  • 2 x Dyness 5kW  batteries
  • All PV Mounts and rails
  • Isolation switches, cabling
  • Optional pre-build of components to a board
  • Optional Touch 50 screen ( you can also view GX data using a smartphone)

If you’re intending to run your entire home off grid then the first step is to see where you can eliminate electricity use. So cooking on wood, or gas; heating water with a pellet / log boiler, range cooker, and/or solar thermal.

With a bigger system – and especially with Dyness batteries, a Cerbo GX or Color Control GX unit is essential to manage everything properly. It enables the system to be properly configured, to control other devices – such as a generator on/off, and allows you to view and manage an internet connected unit from anywhere in the world.

Note that currently, Multiplus II 48/8000 units cannot be combined in parallel. If you think you may need to expand your inverter requirements in future then a 48/8000 Quattro unit can be substituted.

The solar controller included with this system can accept up to 11kw of PV to allow for future expansion

MultiPlus-II 48/8000/110-100/100 230V

Weight 44 kg
Dimensions 450 × 740 × 300 mm

Lynx Distributor

Weight 2.526 kg
Dimensions 190 × 410 × 90 mm

Cerbo GX 2

Weight 0.416 kg
Dimensions 120 × 220 × 60 mm

GX Touch 50

Weight 0.417 kg
Dimensions 120 × 220 × 60 mm

MEGA-fuse 125A/58V for 48V products (1 pc)

Weight 0.011 kg
Dimensions 10 × 100 × 170 mm

VE.Direct Cable 1,8m

Weight 0.07 kg

RJ12 UTP Cable 1,8 m

Weight 0.044 kg
Dimensions 140 × 140 × 15 mm

VE.Can to CAN-bus BMS type A Cable 5 m

Weight 0.225 kg
Dimensions 130 × 250 × 30 mm

SmartSolar MPPT 250/100-MC4 VE.Can

Weight 5.5 kg
Dimensions 290 × 330 × 160 mm

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)